Deskripsi
VÖLKEL Hand Tap set of 2 pieces DIN 2181 HSS-G left hand thread UNF No. 10 LH – UNF 1” LH
Application:
for general use
- non abrasive material up to 900 N/mm²
- unalloyed and low alloyed steel
- for through and blind holes
- for thread cutting by hand
11 Variants
| Hand Tap set of 2 pieces DIN 2181 HSS-G left hand thread – UNF No. 10 x 32 LH | |
| Type of thread: | Unified Fine Thread |
| Tolerance: | 2B |
| Drive connector: | 4.9 mm |
| Hand Tap set of 2 pieces DIN 2181 HSS-G left hand thread – UNF 1/4 x 28 LH | |
| Type of thread: | Unified Fine Thread |
| Tolerance: | 2B |
| Drive connector: | 4.9 mm |
| Hand Tap set of 2 pieces DIN 2181 HSS-G left hand thread – UNF 5/16 x 24 LH | |
| Type of thread: | Unified Fine Thread |
| Tolerance: | 2B |
| Drive connector: | 4.9 mm |
| Hand Tap set of 2 pieces DIN 2181 HSS-G left hand thread – UNF 3/8 x 24 LH | |
| Type of thread: | Unified Fine Thread |
| Tolerance: | 2B |
| Drive connector: | 5.5 mm |
| Hand Tap set of 2 pieces DIN 2181 HSS-G left hand thread – UNF 7/16 x 20 LH | |
| Type of thread: | Unified Fine Thread |
| Tolerance: | 2B |
| Drive connector: | 6.2 mm |
| Hand Tap set of 2 pieces DIN 2181 HSS-G left hand thread – UNF 1/2 x 20 LH | |
| Type of thread: | Unified Fine Thread |
| Tolerance: | 2B |
| Drive connector: | 7.0 mm |
| Hand Tap set of 2 pieces DIN 2181 HSS-G left hand thread – UNF 9/16 x 18 LH | |
| Type of thread: | Unified Fine Thread |
| Tolerance: | 2B |
| Drive connector: | 9.0 mm |
| Hand Tap set of 2 pieces DIN 2181 HSS-G left hand thread – UNF 5/8 x 18 LH | |
| Type of thread: | Unified Fine Thread |
| Tolerance: | 2B |
| Drive connector: | 9.0 mm |
| Hand Tap set of 2 pieces DIN 2181 HSS-G left hand thread – UNF 3/4 x 16 LH | |
| Type of thread: | Unified Fine Thread |
| Tolerance: | 2B |
| Drive connector: | 11.0 mm |
| Hand Tap set of 2 pieces DIN 2181 HSS-G left hand thread – UNF 7/8 x 14 LH | |
| Type of thread: | Unified Fine Thread |
| Tolerance: | 2B |
| Drive connector: | 14.5 mm |
| Hand Tap set of 2 pieces DIN 2181 HSS-G left hand thread – UNF 1″ x 12 LH | |
| Type of thread: | Unified Fine Thread |
| Tolerance: | 2B |
| Drive connector: | 14.5 mm |
Indonesian 
English