Deskripsi
VÖLKEL Hand Tap set of 3 pieces ISO 529 HSS-G UNEF 1/4 – UNEF 1”
Application:
for general use
- non abrasive material up to 900 N/mm²
- unalloyed and low alloyed steel
- for through and blind holes
- for thread cutting by hand
| Hand Tap set of 3 pieces ISO 529 HSS-G – UNEF 1/4 x 32 | |
| Type of thread: | Unified Extra Fine Thread |
| Tolerance: | 2B |
| Drive connector: | 5.0 mm |
| Hand Tap set of 3 pieces ISO 529 HSS-G – UNEF 5/16 x 32 | |
| Type of thread: | Unified Extra Fine Thread |
| Tolerance: | 2B |
| Drive connector: | 6.3 mm |
| Hand Tap set of 3 pieces ISO 529 HSS-G – UNEF 3/8 x 32 | |
| Type of thread: | Unified Extra Fine Thread |
| Tolerance: | 2B |
| Drive connector: | 8.0 mm |
| Hand Tap set of 3 pieces ISO 529 HSS-G – UNEF 7/16 x 28 | |
| Type of thread: | Unified Extra Fine Thread |
| Tolerance: | 2B |
| Drive connector: | 6.3 mm |
| Hand Tap set of 3 pieces ISO 529 HSS-G – UNEF 1/2 x 28 | |
| Type of thread: | Unified Extra Fine Thread |
| Tolerance: | 2B |
| Drive connector: | 7.1 mm |
| Hand Tap set of 3 pieces ISO 529 HSS-G – UNEF 9/16 x 24 | |
| Type of thread: | Unified Extra Fine Thread |
| Tolerance: | 2B |
| Drive connector: | 9.0 mm |
| Hand Tap set of 3 pieces ISO 529 HSS-G – UNEF 5/8 x 24 | |
| Type of thread: | Unified Extra Fine Thread |
| Tolerance: | 2B |
| Drive connector: | 10.0 mm |
| Hand Tap set of 3 pieces ISO 529 HSS-G – UNEF 3/4 x 20 | |
| Type of thread: | Unified Extra Fine Thread |
| Tolerance: | 2B |
| Drive connector: | 11.2 mm |
| Hand Tap set of 3 pieces ISO 529 HSS-G – UNEF 7/8 x 20 | |
| Type of thread: | Unified Extra Fine Thread |
| Tolerance: | 2B |
| Drive connector: | 12.5 mm |
| Hand Tap set of 3 pieces ISO 529 HSS-G – UNEF 1″ x 20 | |
| Type of thread: | Unified Extra Fine Thread |
| Tolerance: | 2B |
| Drive connector: | 14.0 mm |
Indonesian 
English