Deskripsi
VÖLKEL Hand Tap set of 3 pieces DIN 352 HSS-G left hand thread UNC No. 6 LH – UNC 1” LH
Application:
for general use
- non abrasive material up to 900 N/mm²
- unalloyed and low alloyed steel
- for through and blind holes
- for thread cutting by hand
13 Variants
| Hand Tap set of 3 pieces DIN 352 HSS-G left hand thread – UNC No. 6 x 32 LH | |
| Type of thread: | Unified coarse thread |
| Tolerance: | 2B |
| Drive connector: | 3.0 mm |
| Hand Tap set of 3 pieces DIN 352 HSS-G left hand thread – UNC No. 8 x 32 LH | |
| Type of thread: | Unified coarse thread |
| Tolerance: | 2B |
| Drive connector: | 3.4 mm |
| Hand Tap set of 3 pieces DIN 352 HSS-G left hand thread – UNC No. 10 x 24 LH | |
| Type of thread: | Unified coarse thread |
| Tolerance: | 2B |
| Drive connector: | 4.9 mm |
| Hand Tap set of 3 pieces DIN 352 HSS-G left hand thread – UNC No. 12 x 24 LH | |
| Type of thread: | Unified coarse thread |
| Tolerance: | 2B |
| Drive connector: | 4.9 mm |
| Hand Tap set of 3 pieces DIN 352 HSS-G left hand thread – UNC 1/4 x 20 LH | |
| Type of thread: | Unified coarse thread |
| Tolerance: | 2B |
| Drive connector: | 4.9 mm |
| Hand Tap set of 3 pieces DIN 352 HSS-G left hand thread – UNC 5/16 x 18 LH | |
| Type of thread: | Unified coarse thread |
| Tolerance: | 2B |
| Drive connector: | 4.9 mm |
| Hand Tap set of 3 pieces DIN 352 HSS-G left hand thread – UNC 3/8 x 16 LH | |
| Type of thread: | Unified coarse thread |
| Tolerance: | 2B |
| Drive connector: | 5.5 mm |
| Hand Tap set of 3 pieces DIN 352 HSS-G left hand thread – UNC 7/16 x 14 LH | |
| Type of thread: | Unified coarse thread |
| Tolerance: | 2B |
| Drive connector: | 6.2 mm |
| Hand Tap set of 3 pieces DIN 352 HSS-G left hand thread – UNC 1/2 x 13 LH | |
| Type of thread: | Unified coarse thread |
| Tolerance: | 2B |
| Drive connector: | 7.0 mm |
| Hand Tap set of 3 pieces DIN 352 HSS-G left hand thread – UNC 9/16 x 12 LH | |
| Type of thread: | Unified coarse thread |
| Tolerance: | 2B |
| Drive connector: | 9.0 mm |
| Hand Tap set of 3 pieces DIN 352 HSS-G left hand thread – UNC 5/8 x 11 LH | |
| Type of thread: | Unified coarse thread |
| Tolerance: | 2B |
| Drive connector: | 9.0 mm |
| Hand Tap set of 3 pieces DIN 352 HSS-G left hand thread – UNC 3/4 x 10 LH | |
| Type of thread: | Unified coarse thread |
| Tolerance: | 2B |
| Drive connector: | 11.0 mm |
| Hand Tap set of 3 pieces DIN 352 HSS-G left hand thread – UNC 7/8 x 9 LH | |
| Type of thread: | Unified coarse thread |
| Tolerance: | 2B |
| Drive connector: | 14.5 mm |
| Hand Tap set of 3 pieces DIN 352 HSS-G left hand thread – UNC 1″ x 8 LH | |
| Type of thread: | Unified coarse thread |
| Tolerance: | 2B |
| Drive connector: | 14.5 mm |
Indonesian 
English