Deskripsi
VÖLKEL Short Machine Tap Form C HSS-G NPT 1/16 – NPT 2”
Application:
for general use
- non abrasive material up to 900 N/mm²
- unalloyed and low alloyed steel
- for thread cutting by hand and machine
- for through and blind holes
Variants:
| Short Machine Tap Form C HSS-G – NPT 1/16 x 27 | |
| Type of thread: | american tapered pipe thread, taper 1:16 |
| Drive connector: | 5.5 mm |
| Short Machine Tap Form C HSS-G – NPT 1/8 x 27 | |
| Type of thread: | american tapered pipe thread, taper 1:16 |
| Drive connector: | 5.5 mm |
| Short Machine Tap Form C HSS-G – NPT 1/4 x 18 | |
| Type of thread: | american tapered pipe thread, taper 1:16 |
| Drive connector: | 9.0 mm |
| Short Machine Tap Form C HSS-G – NPT 3/8 x 18 | |
| Type of thread: | american tapered pipe thread, taper 1:16 |
| Drive connector: | 9.0 mm |
| Short Machine Tap Form C HSS-G – NPT 1/2 x 14 | |
| Type of thread: | american tapered pipe thread, taper 1:16 |
| Drive connector: | 12.0 mm |
| Short Machine Tap Form C HSS-G – NPT 3/4 x 14 | |
| Type of thread: | american tapered pipe thread, taper 1:16 |
| Drive connector: | 16.0 mm |
| Short Machine Tap Form C HSS-G – NPT 1″ x 11.5 | |
| Type of thread: | american tapered pipe thread, taper 1:16 |
| Drive connector: | 20.0 mm |
| Short Machine Tap Form C HSS-G – NPT 1.1/4 x 11.5 | |
| Type of thread: | american tapered pipe thread, taper 1:16 |
| Tolerance: | medium |
| Drive connector: | 24.0 mm |
| Short Machine Tap Form C HSS-G – NPT 1.1/2 x 11.5 | |
| Type of thread: | american tapered pipe thread, taper 1:16 |
| Drive connector: | 29.0 mm |
| Short Machine Tap Form C HSS-G – NPT 2″ x 11.5 | |
| Type of thread: | american tapered pipe thread, taper 1:16 |
| Drive connector: | 29.0 mm |
Indonesian 
English